How to setup TPG IPTV?

This FAQ is available for
[Vigor2700][G][V][VG]
 
Procedure STEP-BY-STEP
 
  1. Open your browser and enter 192.168.1.1 in your address bar
  2. Enter the username and password of your router. By default it will be Username: "admin" and Password: (leave as blank) or if you have changed this, please enter the new username and password
  3. Click on "Internet Access" on the left side menu then click on "Multi-PVCs"
  4. Enable Channel 3
  5. In the VPI field type in "0"
  6. In the VCI field type in "35"
  7. Select the QoS Type to "UBR"
  8. Select the Protocol to "MPoA"
  9. Select the Encapsulation to "1483 Bridged IP LLC"
  10. Click "Ok" to save the configuration
 
 
  1. Select "Port-based Bridge" page
  2. Enable Channel 3
  3. Tick P2~P4. Enable the port (P2, P3 or P4) only if the PC is going to connect TPG IPTV
  4. In Service Type, select "IGMP"
  5. Click "OK"
 
 
  1. Click on "Applications" on the left side menu then click on "IGMP"
  2. 17. Tick the "Enable IGMP Proxy"
  3. 18. Click "OK" to save the configuration