Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

Blog

Home»Blog»Latest DrayTek Firmware Updates

Latest DrayTek Firmware Updates

Draytek has recently released new firmware for several models of routers as well as an updated version of Smart Monitor.  The new firmware introduces new features as well as a number of bug fixes. New firmware is available for the following routers:

  • Vigor2925 series : f/w 3.7.4
  • Vigor300B & Vigor3900 : f/w 1.0.8
  • VigorAP 900: f/w 1.1.2

Smart Monitor has been updated to version 2.4.4

Firmware Details

Vigor2925 Series: Firmware version 3.7.4

New Features

  • Add URL link for dashboard panel.
  • Add station list and traffic graph for APM.
  • VoIP function for Vigor2925Vn
  • CVM (Central VPN Management) function.
  •  Dual 3G/LTE function.
  • Two USB modem status.
  • IPv6 for SSH.
  • AP load balance.
  • AP Maintenance.
  •  Rogue AP detection.

 

Vigor3900 : Firmware version  1.0.8

New Features

  • Same WAN VLAN ID can be used in different WAN interfaces. (WAN >> General
  • Setup Mode: Advance, Switch Mode: Double Tag)
  • QoS for multiple WANs.
  • Support SNMP v3.
  • Support country block for Firewall.
  • Support WCF white list.
  • LAN DNS server.
  • BGP routing protocol.
  • SSL VPN tunnel mode (up to 20 tunnels).
  • Web Portal and Hotspot (Guest profile) in User Management.
  • PPTP acceleration for PPTP WAN/Remote Dial-in/LAN to LAN (125Mbps with
  • MPPE, greater than 900Mbps without MPPE).
  • QoS retag option.
  • VPN dial-out failover if WAN disconnected.
  • VPN LAN to LAN for overlap/duplicate subnets.
  • Display the last UP/DOWN log of VPN profile.
  • Add default policy for Firewall and default block policy can be applied.
  •  Add IPv6 firewall settings.
  • Add DNS object.
  • Add a remote capture telnet command (rc), for traffic monitor and wireshark remote capture.
  • Add front panel and VPN status on the dashboard

Vigor300B: Firmware version  1.0.8

New Features

  • Same WAN VLAN ID can be used in different WAN interfaces. (WAN >> General
  • Setup Mode: Advance, Switch Mode: Double Tag
  • QoS for multiple WANs.
  • SNMP v3.
  • Country block for Firewall.
  • WCF white list.
  • LAN DNS server.
  • BGP routing protocol.
  • Web Portal and Hotspot (Guest profile) in User Management.
  • QoS retag option.
  • Add default policy for Firewall and default block policy can be applied.
  • Add IPv6 firewall settings.
  •  Add DNS object.
  •  Add a remote capture telnet command (rc), for traffic monitor and wireshark remote capture.

 

VigorAP 900: Firmware Version 1.1.2

New Features

  • Support LED ON/OFF action for schedule function.
  •  5G wireless IGMP snooping function is enabled in default.
  •  WPS button can be used to disable APM function.
  •  Adjust station list display parameters.

Smart Monitor: version 2.4.4

New Features

  • Support Group report.

Improvement

  • Improved: Optimize data reading speed.

 

The new firmware as well as the latest version of Smart Monitor can be downloaded from:

http://www.draytek.com/index.php?option=com_jumi&view=application&fileid=15&Itemid=583&lang=en

Written by

The author didnt add any Information to his profile yet

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.