Latest Video


DrayTek Transitioning Phone Services to the NBN Part 1

In the previous video (DrayTek Products and Solutions For NBN) we looked at the NBN multi technology mix and the different routers needed for each type of NBN connection.
Usually the service provider will supply a low-end router as part of the bundle which usually does not do everything that is required.
While swapping the router out for a more advanced one is generally fairly straight forward, there is one issue where it can get a bit tricky, and that’s when we want to retain the same telephone service, now provided by the ISP.
In this video we discuss the basics of swapping out the ISP supplied router with a more advance DrayTek router while retaining the existing telephone service provided by the ISP.

 


Latest Application Notes


WAN Connectivity

Configuring VigorLTE 200 Series Router for 4G LTE Connection

This guide shows how to configure the VigorLTE 200 series router to enable 4G communication via the embedded 4G USB modem. You will need a Standard size SIM card from a service provider. In our example we will configure the LTE interface (WAN 1) as the primary connection so it will be always on and WAN 2 will be the backup connection.

Click here to read the application note.


Configuring Vigor2620 LTE Series Router for 4G LTE Connection

The guide will show you how to configure the Vigor2620 LTE series router to enable 4G communication via the embedded 4G USB modem. You will need a Standard size SIM card from a service provider. In our example we will configure the LTE interface (WAN 3) as the primary connection so it will be always on and WAN 1 will be the backup connection.

Click here to read the application note.