• Compliant with Central Management features of DrayTek Vigor devices for simplified network management
  • 24 port Gigabit PoE Web Smart Managed Switch
    24 x Gigabit Ethernet Ports with PoE+
    4 x Gigabit RJ-45/SFP Combo Ports
  • PoE ports 802.3at and 802.3af compliant providing up to 30W per port
  • PoE power budget of 340 watts

  • PoE Scheduling & Ping watchdog power cycle

  • Port based and 802.1q tagged VLANs

  • Voice and Surveillance VLANS with QoS (OUI Mode) providing improved call and video quality

  • QoS with 8 queues for traffic prioritisation

  • IEEE 802.3az (Energy-Efficient Ethernet) Compliant

  • Support SNMP v1/v2c/v3 and Syslog for network monitoring

  • Port Mirroring & Link Aggregation

  • 2 years back to base warranty

Overview

The VigorSwitch P1280 is a 24 port Power over Ethernet (PoE) Gigabit Ethernet switch with an additional 4 Gigabit RJ-45/SFP combo ports. Each PoE port can provide up to 30 Watts of power which is sufficient to power devices such as wireless access points, IP phones and IP surveillance equipment.

With 56 Gbps switching capacity and 41.7 Mbps forwarding rate (64 bytes) this high-performance switch ensures rapid data delivery in modern day networks.

The auto Voice VLAN and QoS feature can be used to improve VoIP call quality on the network.
Up to 8 ports can be grouped using Link Aggregation to provide a high bandwidth link between cascaded switches.

In addition, the VigorSwitch can be centrally managed and monitored from a supported Vigor router which simplifies many configuration tasks.

Power over Ethernet (PoE)

The 24 ports of the VigorSwitch P1280 are 802.3at and 802.3af compliant providing up to 30W per port along with a total power budget of 340 Watts. This is enough to provide power using Ethernet cabling for a number of network devices such as wireless access points, IP phones, and IP cameras. PoE allows installation of these devices where no nearby mains power is available. This results in a reduction in the need for power cables and adapters, lowering the cost of installation.

PoE Power Saving

The VigorSwitch P1280 complies with IEEE 802.2az Energy-Efficient Ethernet to provide power saving. The switch will automatically detect idle clients and cable length to adjust the amount of power required. This green networking feature reduces power consumption.

Selected ports can be switched on and off according to a PoE time Schedule. This feature allows you to switch off devices that are not in use to save electricity or can be used to restart PoE devices.

PoE power is automatically switched off for switch ports that have a non-PoE device attached.

Flexible VLAN Options

The VigorSwitch P1280 supports both port-based and tagged-based VLANS which can be used to add security to your network and create workgroups within an organisation. This allows the network administrator to control LAN access and also reduce unnecessary network traffic.

Up to 256 VLANS are supported in the VigorSwitch P1280. In addition to 802.1q Tag-based VLANS, Auto Voice and Auto Surveillance VLANS are also supported so that traffic from an IP phone or an IP camera can be identified automatically without the need to specify each of their MAC address. The respective QoS (Quality of Service) policy can be applied easily to ensure the best call and video quality.

Other supported VLAN options included are:

  • Management VLAN
  • Port Isolation

Network Security

The VigorSwitch P1280 has a number of security features to prevent the local network being overloaded by superfluous traffic. This includes Storm Control to limit the amount of broadcast and multicast traffic on each port, and DoS Defense to protect the network being flooded by malicious traffic.

Improving Performance by QoS

Heavy LAN traffic can affect critical or time sensitive applications such as VoIP or video streaming. The QoS feature of the VigorSwitch P1280 can prioritise critical or time-sensitive data so that it will not be affected by other traffic.

The VigorSwitch P1280 supports up to 8 traffic queues with customized weight to prioritise data using 802.1p CoS, DSCP, and IP Precedence parameters.

The Auto Voice VLAN and Auto Surveillance VLAN feature in the VigorSwitch P1280 is ideal for networks deploying IP cameras and IP phones.

Speed up the network by Link Aggregation

The VigorSwitch P1280 supports link aggregation using both static configuration and LACP (Link Aggregation Control Protocol). With Link Aggregation up to 8 LAN ports can be grouped to provide high throughput to cascaded switches. Up to 8 Link Aggregation Groups can be configured with each group having up to 8 port members.

Easy Setup & Monitoring

The VigorSwitch P1280 features a brand-new interface design making configuration and management much easier.

The dashboard displays an overview of the system status, usage and power usage of each port as well as other important details.

The responsive web design allows the switch to be monitored through devices having various screen sizes. (Check the GUI of VigorSwitch P1280 from Live Demo).

The VigorSwitch P1280 can also be managed through the Command-Line Interface (CLI) via Telnet or SSH, as well as SNMP and Syslog.

Central Management

The VigorSwitch P1280 can be run in standalone mode and can also be managed using the Central Switch Management feature of Vigor Routers. This provides a central console to manage the VigorSwitches connected directly to the router. Functions that can be performed using Central Switch Management include provisioning, configuration, monitoring and maintenance of the VigorSwitch.

DrayTek VigorACS 2 management platform can also be used to manage the VigorSwitch from a central console *

*Available in a future firmware update.

Specifications

Interface (hide)

Interface
LAN Port24x 10/100/1000 Mbps Gigabit Ethernet with PoE+ PSE, RJ-45
4x Gigabit Ethernet/SFP Combo
Factory Reset Button1

PoE (hide)

PoE
PoE+ (802.3at)-Capable Ports24
PoE (802.3af)-Capable Ports24
PoE Power Budget340 watts
Power Limit
Scheduled On/Off
Power Cycle on PortManual, Ping Watchdog

Capacity (hide)

Capacity
Buffer Size4.1 Mbit
Switching Capacity56 Gbps
Forwarding Rate41.7 Mpps (64 bytes)
MAC Address Table8k
Jumbo FrameUp to 9KB

Networking Standards (hide)

Networking Standards
IP VersionIPv4, IPv6
Ethernet Standards802.3 10Base-T
802.3u 100Base-T
802.3ab 1000Base-T
802.1q Tag-based VLAN
802.3x Flow Control
802.3 Auto-Negotiation
802.1p Class of Service
802.1d STP
802.1w RSTP
802.3ad LACP
802.1AB LLDP
802.3az EEE

VLAN (hide)

VLAN
Max.Number of VLAN256
VLAN Type802.1q Tag-based
Management VLAN
Voice VLAN
Port Isolation

ONVIF Surveillance (hide)

ONVIF Surveillance
Discovery
Surveillance Topology
Real-Time Video Streaming
ONVIF Device MaintenanceFirmware Upgrade, Configuration Backup, Reset Factory Default, Time Settings, Reboot

QoS (hide)

QoS
Number of QoS Queues8
Rate LimitPort-Based Ingress and Egress
Queue SchedulingSPQ, WRR
CoS (Class of Service)802.1p CoS, DSCP, CoS-DSCP, IP Precedence

Security (hide)

Security
Access Control ListMAC, IPv4, IPv6
Storm ControlBroadcast, Unknown Multicast, Unknown Unicast
DoS Defense
IP Source Guard
IP Conflict Prevention
Loop Protection

Link Aggregation (hide)

Link Aggregation
Max. Number of Group8
Max. Number of Member in Each Group8
TypeStatic, LACP
Traffic Load BalancingMAC Address, IP/MAC Address

Multicast (hide)

Multicast
IGMP Snoopingv2, v3(BISS)
IGMP Querierv2, v3(BISS)

Management (hide)

Management
Web InterfaceHTTP, HTTPS
Command Line InterfaceTelnet, SSH
OpenVPN ClientCertificate-based authentication
SNMPv1, v2c, v3
Mail AlertPort Status, Port Speed, System Restart, IP Conflict
LLDP
Syslog
2-Level Admin Privilege
Multiple Admin Accounts
Managed by Vigor Router SWM
Managed by VigorACS 2 (Partially)
Config File Export/Import
SNTP (Simple Network Time Protocol)
Diagnostics ToolsPort Mirroring, Ping, Cable Test

Physical (hide)

Physical
19-inch Rack Mountable Mouting Kit Included
Max. Power Consumption453.3 watts
Dimension441mm x 270mm x 45mm
Weight4.3 kg (9.0 lb)
Operating Temperature0 to 40°C
Storage Temperature-20 to 70°C
Operating Humidity10 to 90% non-condensing
Storage Humidity5 to 90% non-condensing
Certificate

All specifications are subject to change without notice.

DrayTek PoE Switches

Resources

  • Compliant with Central Management features of DrayTek Vigor devices for simplified network management
  • 24 port Gigabit PoE Web Smart Managed Switch
    24 x Gigabit Ethernet Ports with PoE+
    4 x Gigabit RJ-45/SFP Combo Ports
  • PoE ports 802.3at and 802.3af compliant providing up to 30W per port
  • PoE power budget of 340 watts

  • PoE Scheduling & Ping watchdog power cycle

  • Port based and 802.1q tagged VLANs

  • Voice and Surveillance VLANS with QoS (OUI Mode) providing improved call and video quality

  • QoS with 8 queues for traffic prioritisation

  • IEEE 802.3az (Energy-Efficient Ethernet) Compliant

  • Support SNMP v1/v2c/v3 and Syslog for network monitoring

  • Port Mirroring & Link Aggregation

  • 2 years back to base warranty

Overview

The VigorSwitch P1280 is a 24 port Power over Ethernet (PoE) Gigabit Ethernet switch with an additional 4 Gigabit RJ-45/SFP combo ports. Each PoE port can provide up to 30 Watts of power which is sufficient to power devices such as wireless access points, IP phones and IP surveillance equipment.

With 56 Gbps switching capacity and 41.7 Mbps forwarding rate (64 bytes) this high-performance switch ensures rapid data delivery in modern day networks.

The auto Voice VLAN and QoS feature can be used to improve VoIP call quality on the network.
Up to 8 ports can be grouped using Link Aggregation to provide a high bandwidth link between cascaded switches.

In addition, the VigorSwitch can be centrally managed and monitored from a supported Vigor router which simplifies many configuration tasks.

Power over Ethernet (PoE)

The 24 ports of the VigorSwitch P1280 are 802.3at and 802.3af compliant providing up to 30W per port along with a total power budget of 340 Watts. This is enough to provide power using Ethernet cabling for a number of network devices such as wireless access points, IP phones, and IP cameras. PoE allows installation of these devices where no nearby mains power is available. This results in a reduction in the need for power cables and adapters, lowering the cost of installation.

PoE Power Saving

The VigorSwitch P1280 complies with IEEE 802.2az Energy-Efficient Ethernet to provide power saving. The switch will automatically detect idle clients and cable length to adjust the amount of power required. This green networking feature reduces power consumption.

Selected ports can be switched on and off according to a PoE time Schedule. This feature allows you to switch off devices that are not in use to save electricity or can be used to restart PoE devices.

PoE power is automatically switched off for switch ports that have a non-PoE device attached.

Flexible VLAN Options

The VigorSwitch P1280 supports both port-based and tagged-based VLANS which can be used to add security to your network and create workgroups within an organisation. This allows the network administrator to control LAN access and also reduce unnecessary network traffic.

Up to 256 VLANS are supported in the VigorSwitch P1280. In addition to 802.1q Tag-based VLANS, Auto Voice and Auto Surveillance VLANS are also supported so that traffic from an IP phone or an IP camera can be identified automatically without the need to specify each of their MAC address. The respective QoS (Quality of Service) policy can be applied easily to ensure the best call and video quality.

Other supported VLAN options included are:

  • Management VLAN
  • Port Isolation

Network Security

The VigorSwitch P1280 has a number of security features to prevent the local network being overloaded by superfluous traffic. This includes Storm Control to limit the amount of broadcast and multicast traffic on each port, and DoS Defense to protect the network being flooded by malicious traffic.

Improving Performance by QoS

Heavy LAN traffic can affect critical or time sensitive applications such as VoIP or video streaming. The QoS feature of the VigorSwitch P1280 can prioritise critical or time-sensitive data so that it will not be affected by other traffic.

The VigorSwitch P1280 supports up to 8 traffic queues with customized weight to prioritise data using 802.1p CoS, DSCP, and IP Precedence parameters.

The Auto Voice VLAN and Auto Surveillance VLAN feature in the VigorSwitch P1280 is ideal for networks deploying IP cameras and IP phones.

Speed up the network by Link Aggregation

The VigorSwitch P1280 supports link aggregation using both static configuration and LACP (Link Aggregation Control Protocol). With Link Aggregation up to 8 LAN ports can be grouped to provide high throughput to cascaded switches. Up to 8 Link Aggregation Groups can be configured with each group having up to 8 port members.

Easy Setup & Monitoring

The VigorSwitch P1280 features a brand-new interface design making configuration and management much easier.

The dashboard displays an overview of the system status, usage and power usage of each port as well as other important details.

The responsive web design allows the switch to be monitored through devices having various screen sizes. (Check the GUI of VigorSwitch P1280 from Live Demo).

The VigorSwitch P1280 can also be managed through the Command-Line Interface (CLI) via Telnet or SSH, as well as SNMP and Syslog.

Central Management

The VigorSwitch P1280 can be run in standalone mode and can also be managed using the Central Switch Management feature of Vigor Routers. This provides a central console to manage the VigorSwitches connected directly to the router. Functions that can be performed using Central Switch Management include provisioning, configuration, monitoring and maintenance of the VigorSwitch.

DrayTek VigorACS 2 management platform can also be used to manage the VigorSwitch from a central console *

*Available in a future firmware update.

Specifications

Interface (hide)

Interface
LAN Port24x 10/100/1000 Mbps Gigabit Ethernet with PoE+ PSE, RJ-45
4x Gigabit Ethernet, RJ-45/SFP Combo
Factory Reset Button1
Interface
LAN Port
24x 10/100/1000 Mbps Gigabit
Ethernet with PoE+ PSE, RJ-45
4x Gigabit Ethernet, RJ-45/SFP
Combo
Factory Reset Button
1

PoE (hide)

PoE
PoE+ (802.3at)-Capable Ports24
PoE (802.3af)-Capable Ports24
PoE Power Budget340 watts
Power Limit
Scheduled On/Off
Power Cycle on PortManual, Ping Watchdog
PoE
PoE+ (802.3at)-Capable Ports
24
PoE (802.3af)-Capable Ports
24
PoE Power Budget
340 watts
Power Limit
Scheduled On/Off
Power Cycle on Port
Manual, Ping Watchdog

Capacity (hide)

Capacity
Buffer Size4.1 Mbit
Switching Capacity56 Gbps
Forwarding Rate41.7 Mpps (64 bytes)
MAC Address Table8k
Jumbo FrameUp to 9KB
Capacity
Buffer Size
4.1 Mbit
Switching Capacity
56 Gbps
Forwarding Rate
41.7 Mpps (64 bytes)
MAC Address Table
8k
Jumbo Frame
Up to 9KB

Networking Standards (hide)

Networking Standards
IP VersionIPv4, IPv6
Ethernet Standards802.3 10Base-T
802.3u 100Base-T
802.3ab 1000Base-T
802.1q Tag-based VLAN
802.3x Flow Control
802.3 Auto-Negotiation
802.1p Class of Service
802.1d STP
802.1w RSTP
802.3ad LACP
802.1AB LLDP
802.3az EEE
Networking Standards
IP Version
IPv4, IPv6
Ethernet Standards
802.3 10Base-T
802.3u 100Base-T
802.3ab 1000Base-T
802.1q Tag-based VLAN
802.3x Flow Control
802.3 Auto-Negotiation
802.1p Class of Service
802.1d STP
802.1w RSTP
802.3ad LACP
802.1AB LLDP
802.3az EEE

VLAN (hide)

VLAN
Max.Number of VLAN256
VLAN Type802.1q Tag-based
Management VLAN
Voice VLAN
Port Isolation
VLAN
Max.Number of VLAN
256
VLAN Type
802.1q Tag-based
Management VLAN
Voice VLAN
Port Isolation

ONVIF Surveillance (hide)

ONVIF Surveillance
Discovery
Surveillance Topology
Real-Time Video Streaming
ONVIF Device MaintenanceFirmware Upgrade, Configuration Backup, Reset Factory Default, Time Settings, Reboot
ONVIF Surveillance
Discovery
Surveillance Topology
Real-Time Video Streaming
ONVIF Device Maintenance
Firmware Upgrade,
Configuration Backup,
Reset Factory Default,
Time Settings, Reboot

QoS (hide)

QoS
Number of QoS Queues8
Rate LimitPort-Based Ingress and Egress
Queue SchedulingSPQ, WRR
CoS (Class of Service)802.1p CoS, DSCP, CoS-DSCP, IP Precedence
QoS
Number of QoS Queues
8
Rate Limit
Port-Based Ingress and Egress
Queue Scheduling
SPQ, WRR
CoS (Class of Service)
802.1p CoS, DSCP,
CoS-DSCP, IP Precedence

Security (hide)

Security
Access Control ListMAC, IPv4, IPv6
Storm ControlBroadcast, Unknown Multicast, Unknown Unicast
DoS Defense
IP Source Guard
IP Conflict Prevention
Loop Protection
Security
Access Control List
MAC, IPv4, IPv6
Storm Control
Broadcast, Unknown
Multicast, Unknown Unicast
DoS Defense
IP Source Guard
IP Conflict Prevention
Loop Protection

Link Aggregation (hide)

Link Aggregation
Max. Number of Group8
Max. Number of Member in Each Group8
TypeStatic, LACP
Traffic Load BalancingMAC Address, IP/MAC Address
Link Aggregation
Max. Number of Group
8
Max. Number of Member in
Each Group
8
Type
Static, LACP
Traffic Load Balancing
MAC Address,
IP/MAC Address

Multicast (hide)

Multicast
IGMP Snoopingv2, v3(BISS)
IGMP Querierv2, v3(BISS)
Multicast
IGMP Snooping
v2, v3(BISS)
IGMP Querier
v2, v3(BISS)

Management (hide)

Management
Web InterfaceHTTP, HTTPS
Command Line InterfaceTelnet, SSH
OpenVPN ClientCertificate-based authentication
SNMPv1, v2c, v3
Mail AlertPort Status, Port Speed, System Restart, IP Conflict
LLDP
Syslog
2-Level Admin Privilege
Multiple Admin Accounts
Managed by Vigor Router SWM
Managed by VigorACS 2 (Partially)
Config File Export/Import
SNTP (Simple Network Time Protocol)
Diagnostics ToolsPort Mirroring, Ping, Cable Test
Management
Web Interface
HTTP, HTTPS
Command Line Interface
Telnet, SSH
OpenVPN Client
Certificate-based
authentication
SNMP
v1, v2c, v3
Mail Alert
Port Status, Port Speed,
System Restart, IP Conflict
LLDP
Syslog
2-Level Admin Privilege
Multiple Admin Accounts
Managed by Vigor Router
SWM
Managed by VigorACS 2
(Partially)
Config File Export/Import
SNTP (Simple Network Time
Protocol)
Diagnostics Tools
Port Mirroring, Ping, Cable
Test

Physical (hide)

Physical
19-inch Rack Mountable Mouting Kit Included
Max. Power Consumption453.3 watts
Dimension441mm x 270mm x 45mm
Weight4.3 kg (9.0 lb)
Operating Temperature0 to 40°C
Storage Temperature-20 to 70°C
Operating Humidity10 to 90% non-condensing
Storage Humidity5 to 90% non-condensing
Certificate
Physical
19-inch Rack Mountable
Mouting Kit Included
Max. Power Consumption
453.3 watts
Dimension
441mm x 270mm x 45mm
Weight
4.3 kg (9.0 lb)
Operating Temperature
0 to 40°C
Storage Temperature
-20 to 70°C
Operating Humidity
10 to 90% non-condensing
Storage Humidity
5 to 90% non-condensing
Certificate

All specifications are subject to change without notice.

DrayTek PoE Switches

Accessories

Resources