VigorSwitch P2100
DrayTek VigorSwitch P2100 is a compact Layer 2+ Managed Gigabit PoE switch well-suited for smart home and branch/remote sites. It has 2x GbE SFP ports, 8x Gigabit Ethernet PoE/PoE+ ports with power budget of 140 watts, and 1x console port. Featuring Layer 3 features, including DHCP Server and VLAN Routing, VigorSwitch P2100 improves local network sustainability and efficiency regardless of the gateway. Furthermore with IP Conflict Detection & Prevention, ONVIF Surveillance, ping watchdog and a lot more, this is the balanced switch that brings advanced features into small environments.
Interface
Key Features
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritising it with CoS, DSCP, and IP Precedence tag.
Ping Device Check
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.
IPv6 Ready
VigorSwitch P2100 supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
Auto Surveillance & Voice VLAN
Recognise traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritisation.
Web-Based GUI
ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch PQ2121x to route the inter-VLAN traffic directly and offload the router.
Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
Access Control
VigorSwitch P2540xs supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.
[DISPLAY OFF] —– MOBILE VIEW
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritising it with CoS, DSCP, and IP Precedence tag.
Ping Device Check
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.
IPv6 Ready
VigorSwitch P2100 supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
Auto Surveillance & Voice VLAN
Recognise traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritisation.
Web-Based GUI
ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch PQ2121x to route the inter-VLAN traffic directly and offload the router.
Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
Access Control
VigorSwitch P2540xs supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.
ONVIF-Friendly
Recognise ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance
Centralised Hierarchical View
VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.
Image Viewing
Images filmed by IP cameras can be viewed directly on VigorSwitch.
Device Management
Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.
ONVIF Snapshot Alert
Locating Non-Responding IP Cameras Made Easy
It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.
To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.
With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.
IP Conflict Detection & Prevention
Conflict Detection
Keep an eye on the environment and notify the administrator of any IP conflicts.
Conflict Prevention
For a more stable network, VigorSwitch can’t only detect but block the misconfigured or malicious IP host.
LAN Management
An all-in-one management platform for Vigor devices on the LAN side.
Automatic Device Discovery
All you need is connect the Vigor Switch/AP to the LAN side of the router, Vigor Router will then discover the devices to be managed.
Provisioning
Switch profile, including VLAN, enabled/disabled port, and rate limit, may be set on the Vigor Router and provisioned to the VigorSwitch.
Monitoring
Vigor Router provides a centralized hierarchical view of managing devices. Once there’s alert happens, you may also check the log and receive the notification.
System Maintenance
You may perform a factory reset, save/restore a configuration backup, or trigger a remote reboot directly on the Vigor Router. There’s no need to log in to each device’s management page.
Management Solution
All-in-One Management |
|---|
Vigor Router SWM
- Auto-Discovery
- Provisioning
- Monitoring
- Centralized Hierarchy View
- Reboot PoE Devices Remotely
- Quick VLAN Configuration
[DISPLAY OFF] —– MOBILE VIEW
Vigor Router SWM
- Auto-Discovery
- Provisioning
- Monitoring
- Centralized Hierarchy View
- Reboot PoE Devices Remotely
- Quick VLAN Configuration
Software Management |
|---|
VigorACS 3
- Zero Touch Deployment & Provisioning
- Auto VPN
- Interface Quality & SLA
- VoIP Optimization & Monitoring
- Application Visibility
- Application Based SD-WAN Policy
- Customized Hotspot Page with Multilingual
- Hotspot Clients Analytics
- ACS Server Load Balancing / Failover
VigorConnect
- Auto-Discovery
- Auto-Provisioning
- Monitoring
- Centralised Hierarchy View
- Alarm
- Reboot VigorAP Remotely
- Scheduled Maintenance
[DISPLAY OFF] —– MOBILE VIEW
VigorACS 3
- Zero Touch Deployment & Provisioning
- Auto VPN
- Interface Quality & SLA
- VoIP Optimization & Monitoring
- Application Visibility
- Application Based SD-WAN Policy
- Customized Hotspot Page with Multilingual
- Hotspot Clients Analytics
- ACS Server Load Balancing / Failover
VigorConnect
- Auto-Discovery
- Auto-Provisioning
- Monitoring
- Centralised Hierarchy View
- Alarm
- Reboot VigorAP Remotely
- Scheduled Maintenance
In-the-Box
VigorSwitch P2100
Rack Mount Kit
Console Cord
Power Cord
Quick Start Guide
Specifications
Interface [Display None]
| Interface | |
|---|---|
| LAN Port | 8 x 10/100/1000Mbps Ethernet, RJ-45 ports 2 x 1000Mbps SFP slots |
| Console Port | 1 x RJ-45 |
| Factory Reset Button | 1 |
[DISPLAY OFF] —– MOBILE VIEW
| Interface | |
|---|---|
| LAN Port: 8 x 10/100/1000Mbps Ethernet, RJ-45 2 x 1000Mbps SFP slot | |
| Console Port: 1 x RJ-45 | |
| Factory Reset Button: | 1 |
PoE [Display None]
| PoE | |
|---|---|
| PoE Capable Ports | 8 |
| PoE Standards | PoE/PoE+(802.3af/802.3at), Type mode A |
| PoE Power Budget | 140 watts |
| Scheduled On/Off | |
[DISPLAY OFF] —– MOBILE VIEW
| PoE | |
|---|---|
| PoE Capable Ports: | 8 |
| PoE Standards: PoE/PoE+(802.3af/802.3at), Type mode A | |
| PoE Power Budget: 140 watts | |
| Scheduled On/Off: | |
Capacity [Display None]
| Capacity | |
|---|---|
| Buffer Size | 4.1 Mbit |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps (64 bytes) |
| MAC Address Table | 8k |
| Jumbo Frame | Up to 9KB |
| L3 Routing Table | |
[DISPLAY OFF] —– MOBILE VIEW
| Capacity | |
|---|---|
| Buffer Size: 4.1 Mbit | |
| Switching Capacity: 20 Gbps | |
| Forwarding Rate: 14.88 Mpps (64 bytes) | |
| MAC Address Table: 8k | |
| Jumbo Frame: Up to 9KB | |
| L3 Routing Table: | |
Networking Standards [Display None]
| Networking Standards | |
|---|---|
| IP Version | IPv4, IPv6 |
| Ethernet Standards | 802.3af PoE 802.3at PoE+ 802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T 802.3x Flow Control 802.3 Auto-Negotiation 802.1q Tag-based VLAN 802.1p Class of Service 802.1d STP 802.1w RSTP 802.1s MSTP 802.3ad LACP 802.1ad QinQ 802.1x Port Access Control 802.1AB LLDP 802.3az EEE |
[DISPLAY OFF] —– MOBILE VIEW
| Networking Standards |
|---|
| IP Version: IPv4, IPv6 |
| Ethernet Standards: 802.3af PoE 802.3at PoE+ 802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T 802.3x Flow Control 802.3 Auto-Negotiation 802.1q Tag-based VLAN 802.1p Class of Service 802.1d STP 802.1w RSTP 802.1s MSTP 802.3ad LACP 802.1ad QinQ 802.1x Port Access Control 802.1AB LLDP 802.3az EEE |
VLAN [Display None]
| VLAN | |
|---|---|
| Max.Number of VLAN | 256 |
| VLAN Type | 802.1q Tag-based MAC-based Protocol-Based Management VLAN Voice VLAN Surveillance VLAN |
| GVRP | |
| Q-in-Q | Basic |
[DISPLAY OFF] —– MOBILE VIEW
| VLAN | |
|---|---|
| Max.Number of VLAN: 256 | |
| VLAN Type: 802.1q Tag-based MAC-based Protocol-Based Management VLAN Voice VLAN Surveillance VLAN | |
| GVRP: | |
| Q-in-Q: Basic | |
ONVIF Surveillance [Display None]
| ONVIF Surveillance | |
|---|---|
| Discovery | |
| Surveillance Topology | |
| Real-Time Video Streaming | |
| ONVIF Device Maintenance | Device Info, Network Settings, Reset Factory Default, Time Settings, Reboot |
[DISPLAY OFF] —– MOBILE VIEW
| ONVIF Surveillance | |
|---|---|
| Discovery: | |
| Surveillance Topology: | |
| Real-Time Video Streaming: | |
| ONVIF Device Maintenance: Device Info, Network Settings, Reset Factory Default, Time Settings, Reboot | |
QoS [Display None]
| QoS | |
|---|---|
| Number of QoS Queues | 8 |
| Queue Scheduling | SPQ, WRR |
| CoS (Class of Service) | CoS, DSCP, CoS-DSCP, IP Precedence |
| Rate Limit | |
[DISPLAY OFF] —– MOBILE VIEW
| QoS | |
|---|---|
| Number of QoS Queues: | 8 |
| CoS (Class of Service): CoS, DSCP, CoS-DSCP, IP Precedence | |
| Queue Scheduling: SPQ, WRR | |
| Rate Limit: | |
Spanning Tree [Display None]
| Spanning Tree | |
|---|---|
| STP | |
| RSTP | |
| MSTP | |
[DISPLAY OFF] —– MOBILE VIEW
| Spanning Tree | |
|---|---|
| STP: | |
| RSTP: | |
| MSTP: | |
Security [Display None]
| Security | |
|---|---|
| Authentication Server | RADIUS, TACACS+ |
| 802.1X/MAC Authentication | |
| IP Source Guard | |
| Traffic Control | DoS Defense, Storm Control |
| IP Conflict Prevention | |
| Loop Protection | |
| Dynamic ARP Inspection (DAI) | |
| DHCP Snooping | |
[DISPLAY OFF] —– MOBILE VIEW
| Security | |
|---|---|
| Authentication Server: RADIUS, TACACS+ | |
| 802.1X/ MAC Authentication: | |
| IP Source Guard: | |
| Traffic Control: DoS Defense, Storm Control | |
| IP Conflict Prevention: | |
| Loop Protection: | |
| Dynamic ARP Inspection (DAI): | |
| DHCP Snooping: | |
Link Aggregation [Display None]
| Link Aggregation | |
|---|---|
| Max. Number of Group | 4 |
| Max. Number of Member in Each Group | 8 |
| Type | Static, LACP |
| Traffic Load Balancing | MAC Address, IP/MAC Address |
[DISPLAY OFF] —– MOBILE VIEW
| Link Aggregation | |
|---|---|
| Max. Number of Group: | 4 |
| Max. Number of Member in Each Group: | 8 |
| Type: Static, LACP | |
| Traffic Load Balancing: | |
Multicast [Display None]
| Multicast | |
|---|---|
| IGMP Snooping | v2, v3(BISS) |
| IGMP Querier | |
| MLD Snooping | v1, v2 (Basic) |
| Max. Number of Multicast Group | 256 |
| Multicast Group Filtering / Throttling | |
| MVR (Multicast VLAN Registration) | |
[DISPLAY OFF] —– MOBILE VIEW
| Multicast | |
|---|---|
| IGMP Snooping: v2, v3(BISS) | |
| IGMP Querier: | |
| MLD Snooping: v1, v2(Basic) | |
| Max. Number of Multicast Group: 256 | |
| Multicast Group Filtering / Throttling: | |
| MVR (Multicast VLAN Registration): | |
Layer 3 Features [Display None]
| Layer 3 Features | |
|---|---|
| Static Route | |
| VLAN Route | |
| DHCP Server | |
[DISPLAY OFF] —– MOBILE VIEW
| Layer 3 Features | |
|---|---|
| Static Route: | |
| VLAN Route: | |
| DHCP Server: | |
Management [Display None]
| Management | |
|---|---|
| Local Service | HTTP, HTTPS, Telnet, SSH v2 |
| Config Backup/Restore | |
| Dual Image | |
| 2-Level Admin Privilege | |
| Access Control | Access List |
| OpenVPN Client | Certificate-based authentication |
| SNMP | v1, v2c, v3 |
| RMON Group | 1, 2, 3, 9 |
| SNTP (Simple Network Time Protocol) | |
| LLDP | |
| LLDP-MED | |
| Mail Alert | Port Status, Port Speed, System Restart, IP Conflict, Hardware Monitor, Device Check, ONVIF IP Cam Snapshot |
| VigorRouter Management (SWM) | |
| VigorConnect Management (Since f/w) | V2.6.5 |
| VigorACS Management (Since f/w) | V2.6.5 |
[DISPLAY OFF] —– MOBILE VIEW
| Management | |
|---|---|
| Local Service: HTTP, HTTPS, Telnet, SSH v2 | |
| Config Backup/ Restore: | |
| Dual Image: | |
| 2-Level Admin Privilege: | |
| Access Control: Access List | |
| OpenVPN Client: | |
| SNMP: v1, v2c, v3 | |
| RMON Group: 1, 2, 3, 9 | |
| SNTP (Simple Network Time Protocol): | |
| LLDP: | |
| LLDP-MED: | |
| Mail Alert: Port Status, Port Speed, System Restart, IP Conflict, Hardware Monitor, Device Check, ONVIF IP Cam Snapshot | |
| VigorRouter Management (SWM): | |
| VigorConnect Management (Since f/w): V2.6.5 | |
| VigorACS Management (Since f/w): V2.6.5 | |
Physical [Display None]
| Physical | |
|---|---|
| Rack Mountable | 1U |
| Power Input | AC 100-240V @ 2.6A |
| Max. Power Consumption | 164.3 watts |
| Dimension (mm) | 319(W) x 208(D) x 45(H) |
| Weight | 4.3 kg (9.0 lb) |
| Operating Temperature | 0 to 45°C |
| Storage Temperature | -20 to 70°C |
| Operating Humidity | 10 to 90% non-condensing |
| Storage Humidity | 5 to 90% non-condensing |
| Certificate |   |
[DISPLAY OFF] —– MOBILE VIEW
| Physical | |
|---|---|
| Rack Mountable: | 1U |
| Power Input: AC 100-240V @ 2.6A | |
| Max. Power Consumption: 164.3 watts | |
| Dimension (mm): 319(W) x 208(D) x 45(H) | |
| Weight: 4.3 kg (9.0 lb) | |
| Operating Temperature: 0 to 45°C | |
| Storage Temperature: -20 to 70°C | |
| Operating Humidity: 10 to 90% non-condensing | |
| Storage Humidity: 5 to 90% non-condensing | |
| Certificate: | |
Note :
- All specifications are subject to change without notice.
- The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.
