L2+ Managed 2.5GbE Switch with 8 x 2.5GbE PoE+ ports (140W total), 4 x 10GbE SFP+ slots, and 1 x Console port
The VigorSwitch PQ2121x is a Layer 2+ Managed switch with 8 x 2.5GbE PoE RJ-45 ports and 4 x 10GbE SFP+ ports for connecting optic fibre modules or DAC cables.
Each of the eight 2.5 Gigabit Ethernet ports of the VigorSwitch PQ2121x supports 802.3at and 802.3af PoE standards, providing up to 30W of power per port for a total power budget of 140 watts. Network connectivity and reliability are enhanced with advanced Layer 3 features plus a DHCP server and VLAN routing.
The PQ2121x enables full WiFi 6 capability when deployed with WiFi 6 VigorAPs like VigorAP 1062C.
Interface
Key Features
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritising it with CoS, DSCP, and IP Precedence tag.
Ping Device Check
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.
ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
2.5GbE
Provides higher performance to WiFi 6 AP and other Ethernet devices.
IPv6 Ready
VigorSwitch PQ2121x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
10G SFP+
Provides 10G-capable fiber SFP+ ports for aggregation or uplinking to the core switches.
Web-Based GUI
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch PQ2121x to route the inter-VLAN traffic directly and offload the router.
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Auto Surveillance & Voice VLAN
Recognise traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritisation.
Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
[DISPLAY OFF] —– MOBILE VIEW
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritising it with CoS, DSCP, and IP Precedence tag.
Ping Device Check
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.
ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
2.5GbE
Provides higher performance to WiFi 6 AP and other Ethernet devices.
IPv6 Ready
VigorSwitch PQ2121x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
10G SFP+
Provides 10G-capable fiber SFP+ ports for aggregation or uplinking to the core switches.
Web-Based GUI
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch PQ2121x to route the inter-VLAN traffic directly and offload the router.
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Auto Surveillance & Voice VLAN
Recognise traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritisation.
Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
ONVIF-Friendly
Recognise ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance
Centralised Hierarchical View
The VigorSwitch PQ2121x automatically detects ONVIF devices and displays the topology of connected IP cameras and NVRs.
Image Viewing
Images filmed by IP cameras can be viewed directly within the VigorSwitch PQ2121x web UI.
Device Management
Basic configuration/maintenance tasks for ONVIF devices such as remote reboot, factory reset and changing network settings can all be done remotely from the VigorSwitch PQ2121x web UI.
ONVIF Snapshot Alert
Locating Non-Responding IP Cameras Made Easy
Managing a network of IP cameras across different locations is difficult, as when any of the cameras stop functioning, there is no easy way to detect or revive it. To help with this problem, the VigorSwitch PQ2121x regularly pings ONVIF IP cameras and takes snapshots from them periodically. If one IP camera stops responding, an email alert is sent with the latest snapshot from the camera.
With PoE VigorSwitch models, the switch can also provide first aid by automatically power cycling the particular port to reboot the camera.
IP Conflict Detection & Prevention
Conflict Detection
The VigorSwitch constantly checks the network environment and notifies the administrator of any IP conflicts.
Conflict Prevention
For a more stable network, the VigorSwitch detects misconfigured or malicious IP hosts and blocks them before damages are done.
Device Check
Ping Check for LAN Devices
A VigorSwitch can continuously ping the LAN devices, and when the device stops responding to the ping, it will instigate a PoE cycle to the associated port (PoE model only) and/or send an email alert to the administrator.
LAN Management
An all-in-one management platform for Vigor devices on the LAN side.
Automatic Device Discovery
Connect a Vigor Switch or AP to the LAN side of the Vigor Router, and the router will auto-discover the device to allow it to be managed.
Provisioning
Basic settings may be done on the Vigor Router, and then provisioned to the managed Vigor Switches or APs.
Monitoring
The Vigor Router provides a centralized view of managed devices, so you can monitor and check the status of Vigor Switches or APs connected.
System Maintenance
Perform factory resets, save/restore configuration backups, or trigger reboots remotely from the Vigor Router’s interface. There is no need to log in to each device’s management page.
Management Solution
All-in-One Management |
|---|
Vigor Router SWM
- Auto-Discovery
- Provisioning
- Monitoring
- Centralized Hierarchy View
- Reboot PoE Devices Remotely
- Quick VLAN Configuration
[DISPLAY OFF] —– MOBILE VIEW
Vigor Router SWM
- Auto-Discovery
- Provisioning
- Monitoring
- Centralized Hierarchy View
- Reboot PoE Devices Remotely
- Quick VLAN Configuration
Software Management |
|---|
VigorACS 3
- Zero Touch Deployment & Provisioning
- Auto VPN
- Interface Quality & SLA
- VoIP Optimization & Monitoring
- Application Visibility
- Application Based SD-WAN Policy
- Customized Hotspot Page with Multilingual
- Hotspot Clients Analytics
- ACS Server Load Balancing / Failover
VigorConnect
- Auto-Discovery
- Auto-Provisioning
- Monitoring
- Centralised Hierarchy View
- Alarm
- Reboot VigorAP Remotely
- Scheduled Maintenance
[DISPLAY OFF] —– MOBILE VIEW
VigorACS 3
- Zero Touch Deployment & Provisioning
- Auto VPN
- Interface Quality & SLA
- VoIP Optimization & Monitoring
- Application Visibility
- Application Based SD-WAN Policy
- Customized Hotspot Page with Multilingual
- Hotspot Clients Analytics
- ACS Server Load Balancing / Failover
VigorConnect
- Auto-Discovery
- Auto-Provisioning
- Monitoring
- Centralised Hierarchy View
- Alarm
- Reboot VigorAP Remotely
- Scheduled Maintenance
In-the-Box
VigorSwitch PQ2121x
Rack Mount Kit
Console Cord
Power Cord
Quick Start Guide & Rubber Pads
Specifications
Interface [Display None]
| Interface | |
|---|---|
| LAN Port | 8 x 10/100/1000/2500Mbps Ethernet, RJ-45 4 x 1000Mbps/10Gbps SFP+ slot |
| Console Port | 1 x RJ-45 |
| Factory Reset Button | 1 |
[DISPLAY OFF] —– MOBILE VIEW
| Interface | |
|---|---|
| LAN Port: 8 x 10/100/1000/2500Mbps Ethernet, RJ-45 4 x 1000Mbps/10Gbps/ SFP+ slot | |
| Console Port: 1 x RJ-45 | |
| Factory Reset Button: | 1 |
PoE [Display None]
| PoE | |
|---|---|
| PoE Capable Ports | 8 x PoE/PoE+ (802.3af/at), up to 30W per port, Type mode A |
| PoE Power Budget | 140 watts |
| Power Limit | |
| Scheduled On/Off | |
| Power Cycle on Port | Manual, Auto by Ping check timeout |
[DISPLAY OFF] —– MOBILE VIEW
| PoE | |
|---|---|
| PoE Capable Ports: 8 x PoE/PoE+ (802.3af/at), up to 30W per port, Type mode A | |
| PoE Power Budget: 140 watts | |
| Power Limit: | |
| Scheduled On/Off: | |
| Power Cycle on Port: Manual, Auto by Ping check timeout | |
Capacity [Display None]
| Capacity | |
|---|---|
| Buffer Size | 12 Mbit |
| Switching Capacity | 120 Gbps |
| Forwarding Rate | 89.28 Mpps (64 bytes) |
| MAC Address Table | 16k |
| Jumbo Frame | Up to 10KB |
| L3 Routing Table | |
[DISPLAY OFF] —– MOBILE VIEW
| Capacity | |
|---|---|
| Buffer Size: 12 Mbit | |
| Switching Capacity: 120 Gbps | |
| Forwarding Rate: 89.28 Mpps (64 bytes) | |
| MAC Address Table: 16k | |
| Jumbo Frame: Up to 10KB | |
| L3 Routing Table: | |
Networking Standards [Display None]
| Networking Standards | |
|---|---|
| IP Version | IPv4, IPv6 |
| Ethernet Standards | 802.3af PoE 802.3at PoE+ 802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T 802.3bz 2.5GBase-T 802.3ae 10GBase-X 802.3x Flow Control 802.3 Auto-Negotiation 802.1q Tag-based VLAN 802.1p Class of Service 802.1d STP 802.1w RSTP 802.1s MSTP 802.3ad LACP 802.1ad QinQ 802.1x Port Access Control 802.1AB LLDP 802.3az EEE |
[DISPLAY OFF] —– MOBILE VIEW
| Networking Standards |
|---|
| IP Version: IPv4, IPv6 |
| Ethernet Standards: 802.3af PoE 802.3at PoE+ 802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T 802.3bz 2.5GBase-T 802.3ae 10GBase-X 802.3x Flow Control 802.3 Auto-Negotiation 802.1q Tag-based VLAN 802.1p Class of Service 802.1d STP 802.1w RSTP 802.1s MSTP 802.3ad LACP 802.1ad QinQ 802.1x Port Access Control 802.1AB LLDP 802.3az EEE |
VLAN [Display None]
| VLAN | |
|---|---|
| Max.Number of VLAN | 256 |
| VLAN Type | 802.1q Tag-based MAC-based Protocol-Based Management VLAN Voice VLAN Surveillance VLAN |
| GVRP | |
| Q-in-Q | Basic |
[DISPLAY OFF] —– MOBILE VIEW
| VLAN | |
|---|---|
| Max.Number of VLAN: 256 | |
| VLAN Type: 802.1q Tag-based MAC-based Protocol-Based Management VLAN Voice VLAN Surveillance VLAN | |
| GVRP: | |
| Q-in-Q: Basic | |
ONVIF Surveillance [Display None]
| ONVIF Surveillance | |
|---|---|
| Discovery | |
| Surveillance Topology | |
| Real-Time Video Streaming | |
| ONVIF Device Maintenance | Device Info, Network Settings, Reset Factory Default, Time Settings, Reboot |
[DISPLAY OFF] —– MOBILE VIEW
| ONVIF Surveillance | |
|---|---|
| Discovery: | |
| Surveillance Topology: | |
| Real-Time Video Streaming: | |
| ONVIF Device Maintenance: Device Info, Network Settings, Reset Factory Default, Time Settings, Reboot | |
QoS [Display None]
| QoS | |
|---|---|
| Number of QoS Queues | 8 |
| Queue Scheduling | SPQ, WRR |
| CoS (Class of Service) | CoS, DSCP, CoS-DSCP, IP Precedence |
| Rate Limit | |
[DISPLAY OFF] —– MOBILE VIEW
| QoS | |
|---|---|
| Number of QoS Queues: | 8 |
| CoS (Class of Service): CoS, DSCP, CoS-DSCP, IP Precedence | |
| Queue Scheduling: SPQ, WRR | |
| Rate Limit: | |
Spanning Tree [Display None]
| Spanning Tree | |
|---|---|
| STP | |
| RSTP | |
| MSTP | |
[DISPLAY OFF] —– MOBILE VIEW
| Spanning Tree | |
|---|---|
| STP: | |
| RSTP: | |
| MSTP: | |
Security [Display None]
| Security | |
|---|---|
| Authentication Server | RADIUS, TACACS+ |
| 802.1X/MAC Authentication | |
| IP Source Guard | |
| Traffic Control | DoS Defense, Storm Control |
| IP Conflict Prevention | |
| Loop Protection | |
| Dynamic ARP Inspection (DAI) | |
| DHCP Snooping | |
[DISPLAY OFF] —– MOBILE VIEW
| Security | |
|---|---|
| Authentication Server: RADIUS, TACACS+ | |
| 802.1X/ MAC Authentication: | |
| IP Source Guard: | |
| Traffic Control: DoS Defense, Storm Control | |
| IP Conflict Prevention: | |
| Loop Protection: | |
| Dynamic ARP Inspection (DAI): | |
| DHCP Snooping: | |
Link Aggregation [Display None]
| Link Aggregation | |
|---|---|
| Max. Number of Group | 8 |
| Max. Number of Member in Each Group | 8 |
| Type | Static, LACP |
| Traffic Load Balancing | MAC Address, IP/MAC Address |
[DISPLAY OFF] —– MOBILE VIEW
| Link Aggregation | |
|---|---|
| Max. Number of Group: | 8 |
| Max. Number of Member in Each Group: | 8 |
| Type: Static, LACP | |
| Traffic Load Balancing: | |
Multicast [Display None]
| Multicast | |
|---|---|
| IGMP Snooping | v2, v3(BISS) |
| IGMP Querier | |
| MLD Snooping | v1, v2 (Basic) |
| Max. Number of Multicast Group | 256 |
| Multicast Group Filtering / Throttling | |
| MVR (Multicast VLAN Registration) | |
[DISPLAY OFF] —– MOBILE VIEW
| Multicast | |
|---|---|
| IGMP Snooping: v2, v3(BISS) | |
| IGMP Querier: | |
| MLD Snooping: v1, v2(Basic) | |
| Max. Number of Multicast Group: 256 | |
| Multicast Group Filtering / Throttling: | |
| MVR (Multicast VLAN Registration): | |
Layer 3 Features [Display None]
| Layer 3 Features | |
|---|---|
| Static Route | |
| VLAN Route | |
| DHCP Server | |
[DISPLAY OFF] —– MOBILE VIEW
| Layer 3 Features | |
|---|---|
| Static Route: | |
| VLAN Route: | |
| DHCP Server: | |
Management [Display None]
| Management | |
|---|---|
| Local Service | HTTP, HTTPS, Telnet, SSH v2 |
| Config Backup/Restore | |
| Dual Image | |
| 2-Level Admin Privilege | |
| Access Control | Access List |
| OpenVPN Client | Certificate-based authentication |
| sFlow | |
| SNMP | v1, v2c, v3 |
| RMON Group | 1, 2, 3, 9 |
| SNTP (Simple Network Time Protocol) | |
| LLDP | |
| LLDP-MED | |
| Mail Alert | Port Status, Port Speed, System Restart, IP Conflict, Hardware Monitor, Device Check, ONVIF IP Cam Snapshot |
| VigorRouter Management (SWM) | |
| VigorConnect Management (Since f/w) | V2.8.1 |
| VigorACS Management (Since f/w) | V2.8.1 |
[DISPLAY OFF] —– MOBILE VIEW
| Management | |
|---|---|
| Local Service: HTTP, HTTPS, Telnet, SSH v2 | |
| Config Backup/ Restore: | |
| Dual Image: | |
| 2-Level Admin Privilege: | |
| Access Control: Access List | |
| OpenVPN Client: | |
| sFlow: | |
| SNMP: v1, v2c, v3 | |
| RMON Group: 1, 2, 3, 9 | |
| SNTP (Simple Network Time Protocol): | |
| LLDP: | |
| LLDP-MED: | |
| Mail Alert: Port Status, Port Speed, System Restart, IP Conflict, Hardware Monitor, Device Check, ONVIF IP Cam Snapshot | |
| VigorRouter Management (SWM): | |
| VigorConnect Management: Since f/w V2.8.1 | |
| VigorACS Management: Since f/w V2.8.1 | |
Physical [Display None]
| Physical | |
|---|---|
| Rack Mountable | 1U |
| Power Input | AC 100-240V @ 2.5A |
| Max. Power Consumption | 200 watts |
| Dimension (mm) | 355(W) x 205(D) x 44(H) |
| Weight | 4.3 kg (9.0 lb) |
| Ventilation | Variable-speed Fan |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 70°C |
| Operating Humidity | 10 to 90% non-condensing |
| Storage Humidity | 5 to 90% non-condensing |
| Certificate |   |
[DISPLAY OFF] —– MOBILE VIEW
| Physical | |
|---|---|
| Rack Mountable: | 1U |
| Power Input: AC 100-240V @ 2.5A | |
| Max. Power Consumption: 200 watts | |
| Dimension (mm): 355(W) x 205(D) x 44(H) | |
| Weight: 4.3 kg (9.0 lb) | |
| Operating Temperature: 0 to 50°C | |
| Storage Temperature: -20 to 70°C | |
| Operating Humidity: 10 to 90% non-condensing | |
| Storage Humidity: 5 to 90% non-condensing | |
| Certificate: | |
Note :
- All specifications are subject to change without notice.
- The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.
