DrayTek is excited to announce the official release of firmware version 5.4.4 for the Vigor2928 Series.
Key highlights of this major update include:
- Upgraded P5 Port Flexibility: Port P5 has been upgraded from a standard 2.5GbE LAN port to a switchable 2.5GbE WAN/LAN port, giving your network greater redundancy, load balancing, and failover options.
- Supports Threat Protection: Added support for Threat Protection – Guardian, our new license-based cybersecurity solution.
What’s New in Version 5.4.4:
New Features
- Support Threat Protection – Guardian, our new license-based cybersecurity solution.
- Support configuring the 2.5G port as a WAN/LAN port (P5).
- Increase the number of More Remote Subnets entries in VPN Site-to-Site profiles from 12 to 32.
- Add a new Custom Session Timeout field to configure longer timeout values for specified protocols.
Improvements
- Fixed: IP Routed Subnet situation did not work properly.
Click here to download the firmware.
10-Gigabit High-Speed Multi-WAN Wi-Fi 7 (be model) Security VPN Routers
Apart from the Gigabit Ethernet WAN port (P1) for broadband services that use an Ethernet interface (such as UFB in New Zealand or FTTP, FTTC, HFC, Satellite, and Fixed Wireless in Australia), all models feature a triple-combo port with two additional WAN options: a 10GbE SFP+ WAN slot (P2), a 10GbE Ethernet WAN/LAN port (P3), and a 10GbE SFP+ LAN slot (P4). Any two of these three ports can be used simultaneously, and port P3 can also be configured as a high-speed LAN port when not serving as the WAN. The 2.5GbE port (P5) can also be used as either a LAN or WAN interface. 4G LTE connectivity is also featured (via an attached 4G USB modem), and Wireless WAN (be model); all WAN interfaces can be configured for use in Load Balance mode or Failover mode.
The Vigor2928be features 802.11be (Wi-Fi 7, BE7200) with 4×4 MIMO (1376 Mbps for the 2.4 GHz band and 5765 Mbps for the 5 GHz band).
Equipped with Object-based SPI Firewall, Content Security Management (CSM), URL/IP Reputation and Port Knocking, IPv6, 50 simultaneous IPsec/OpenVPN/WireGuard VPN tunnels, Tag-based VLAN, multiple subnets and a set of traffic management features, these routers are an excellent choice for SMB.
Central Management features provide a centralised console to manage networks, including Virtual AP Controller to configure and manage up to 20 DrayTek wireless Access Points, and Virtual Switch Controller to configure and manage up to 10 DrayTek switches.
These routers can be mounted using a 1RU rack-mount bracket (DR101) on a standard 19” rack or cabinet.
Interface
4x Wi-Fi Antenna (Internal)
*You can use only two ports at a time from P2 to P4. Also, P2 and P3 cannot both be configured as WAN ports simultaneously.
Models
Overview
- Ready to connect to NTD (Network Termination Device) of NBN (Aust) and UFB (NZ)
- Multi-WAN for Failover, Load Balancing and High Availability mode
- 1 x fixed GbE WAN port (P1)
- 1 x 10GbE WAN/LAN port (P3)
- 1 x fixed SFP+ WAN port (P2)
- 1 x 10GbE SFP+ LAN slot (P4)
- For P2~P4, any two of these three ports can be used simultaneously, and P3 can also be configured as a high-speed LAN port when not serving as the WAN
- 1 x 2.5GbE WAN/LAN port (P5)
- 3 x fixed GbE LAN ports (P6~P8)
- 2 x USB 2.0 ports for connection to two 4G LTE USB modems, FTP server, network printer and thermometer
- Up to 8 subnets and 60,000 NAT sessions
- 50 x VPN tunnels, including IPsec, OpenVPN, and WireGuard, with EasyVPN features that simplify VPN setup for effortless connectivity
- Integrated IEEE 802.11be (Wi-Fi 7, BE7200) wireless Access Point, with 4×4 MU-MIMO, dual band, up to 1376 Mbps for the 2.4 GHz band and 5764 Mbps for the 5 GHz band
- IPsec VPN throughput up to 540 Mbps (AES 256 bits)
- WireGuard VPN throughput up to 85 Mbps
- Object-based SPI Firewall, Content Security Management (CSM), URL/IP Reputation and Port Knocking
- IAM (Identity and Access Management) to enhance security management and user experience
- IPv6 & IPv4
- Virtual AP Controller for the deployment of up to 20 wireless VigorAPs
- Virtual Switch Controller to manage up to 10 VigorSwitches
- Supports VigorACS 3 Central Management Software for remote management
- Supports Threat Protection – Guardian, a license-based cybersecurity solution
- 2 years back to base warranty
Overview
- Ready to connect to NTD (Network Termination Device) of NBN (Aust) and UFB (NZ)
- Multi-WAN for Failover, Load Balancing and High Availability mode
- 1 x fixed GbE WAN port (P1)
- 1 x 10GbE WAN/LAN port (P3)
- 1 x fixed SFP+ WAN port (P2)
- 1 x 10GbE SFP+ LAN slot (P4)
- For P2~P4, any two of these three ports can be used simultaneously, and P3 can also be configured as a high-speed LAN port when not serving as the WAN
- 1 x 2.5GbE WAN/LAN port (P5)
- 3 x fixed GbE LAN ports (P6~P8)
- 2 x USB 2.0 ports for connection to two 4G LTE USB modems, FTP server, network printer and thermometer
- Up to 8 subnets and 60,000 NAT sessions
- 50 x VPN tunnels, including IPsec, OpenVPN, and WireGuard, with EasyVPN features that simplify VPN setup for effortless connectivity
- IPsec VPN throughput up to 540 Mbps (AES 256 bits)
- WireGuard VPN throughput up to 85 Mbps
- Object-based SPI Firewall, Content Security Management (CSM), URL/IP Reputation and Port Knocking
- IAM (Identity and Access Management) to enhance security management and user experience
- 802.11be (Wi-Fi 7, BE7200) Wi-Fi with 4×5 MIMO (1376 Mbps for the 2.4 GHz band and 5765 Mbps for the 5 GHz band) – be model coming soon
- IPv6 & IPv4
- Virtual AP Controller for the deployment of up to 20 wireless VigorAPs
- Virtual Switch Controller to manage up to 10 VigorSwitches
- Supports VigorACS 3 Central Management Software for remote management
- Supports Threat Protection – Guardian, a license-based cybersecurity solution
- 2 years back to base warranty
DrayTek Vigor2928 Series Overview
Watch: DrayTek Vigor2928 Series Overview
Config Demo
