DrayOS 5 now supports push notifications for the VigorAP 1062C and other DrayOS 5 Access Points. With the DrayTek Wireless App (version 1.3.3 or later), network administrators can receive instant alerts for important events such as client disconnections, mesh node offline status, and login attempts.

This enhancement allows administrators to stay informed of wireless network activity in real-time, directly from their mobile devices, making network monitoring faster and more convenient.

To strengthen network security, DrayOS 5 introduces MAC Filtering for Access Control. This feature enables administrators to specify exactly which devices are allowed to connect by adding their MAC addresses to a defined profile.

To enable and configure MAC Filtering:

1. Navigate to Security >> MAC Filtering Profile to create a new profile.
2. Add the device names and their corresponding MAC addresses.
3. Apply the MAC Filtering profile to the desired SSID under Configuration >> Wireless LAN to enforce access control.

This enhancement provides more precise control over network access, helping to ensure that only authorised devices can connect.

When connecting to the VigorAP 1062C, this feature automatically detects whether the access point (AP) is wired or wireless and selects the most suitable network topology. For smaller deployments with fewer than 8 APs, it seamlessly enables Mesh mode (1 Root AP and up to 7 Node APs). For larger deployments with up to 50 APs (including 1 Root AP), it activates AP Management mode for enhanced control and scalability.

The intuitive monitoring panel provides a comprehensive overview of your network, allowing effortless tracking of devices, mesh statuses, and nearby APs. Administrators gain detailed insights, including WLAN clients, MAC and IP addresses, connection statuses, SSIDs for each radio, the number of connected clients, and firmware versions, all accessible on a single page. Offline APs are clearly identified, simplifying network management and optimisation.

Once a Node AP is automatically detected and added to the management group, the Root AP provisions all necessary settings without manual intervention, enabling rapid, hands-free deployment across your network.

Experience uninterrupted connectivity as devices switch seamlessly between access points with intelligent roaming support. DrayOS 5 supports both Over-the-DS (via wired backbone) and Over-the-Air handoffs, ensuring reliable performance during video calls, voice chats, and other real-time applications.

Signal thresholds and AP steering guide devices to stronger access points while balancing network loads, providing stable performance across all devices, everywhere.

Connect a Vigor Switch or AP to the LAN side of the Vigor Router, and the router will auto-discover the device to allow it to be managed.

Basic settings may be done on the Vigor Router, and then provisioned to the managed Vigor Switches or APs.

The Vigor Router provides a centralized view of managed devices, so you can monitor and check the status of Vigor Switches or APs connected.

Perform factory resets, save/restore configuration backups, or trigger reboots remotely from the Vigor Router’s interface. There is no need to log in to each device’s management page.

VigorAP 1062C

Ceiling Mount Bracket

Kits & Screws
(Used for T-Rail Mounting)

Screws
(Used for Ceiling Mounting)

RJ-45 Cable (Ethernet)

Quick Start Guide