28-port Layer 2+ Managed 10GbE Switch
The DrayTek VigorSwitch G2282x is a Layer 2+ Managed 10 Gbps switch. It features 24 Gigabit Ethernet LAN ports and 4 SFP+ 10Gbps fibre links for uplink/downlink. In addition to the fixed AC power input, the VigorSwitch G2282x offers a DC power input as an additional power source, which helps ensure uninterrupted operation and protects connected devices in the event of an AC power supply failure.
It supports advanced Layer 3 features such as DHCP Server and VLAN Routing. These improve network efficiency and ensure continuous LAN connectivity, even when the gateway is offline, making it an ideal solution for a network experiencing increased traffic demands.
Interface
Key Features
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch G2282x to route the inter-VLAN traffic directly and offload the router.
ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
IPv6 Ready
VigorSwitch G2282x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
Web-Based GUI
Access Control
VigorSwitch G2282x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more
10GbE SFP+
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
[DISPLAY OFF] —– MOBILE VIEW
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch G2282x to route the inter-VLAN traffic directly and offload the router.
ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
IPv6 Ready
VigorSwitch G2282x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
Web-Based GUI
Access Control
VigorSwitch G2282x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more
10GbE SFP+
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
Advanced Layer 2+ Features
DHCP Server & VLAN Routing
Improving LAN Network Sustainability and Efficiency, with or without a Router
In an extensive LAN network, much traffic does not go to the Internet but to the servers within the LAN. For example, IP cameras store videos on the NVR, IP phones register with the PBX, and clients access the file server, among other things.
A Layer 2+ switch with DHCP server and VLAN routing functionalities, positioned to receive traffic before the router, is ideal for distributing the load on your router and ensuring your LAN network operates continuously, even when the router is offline.
The VigorSwitch assigns dynamic IP addresses to as many as 8 VLANs as a DHCP server. With VLAN routing, the VigorSwitch accommodates up to 512 routes.
Bind IP to MAC
Reserve an IP Address for an Important Device
As a DHCP server, the layer 2+ VigorSwitch assists in reserving IP addresses for your essential devices that users access frequently.
ONVIF-Friendly
Recognise ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance
Centralised Hierarchical View
The VigorSwitch G2282x automatically detects ONVIF devices and displays the topology of connected IP cameras and NVRs.
Image Viewing
Images filmed by IP cameras can be viewed directly within the VigorSwitch G2282x web UI.
Device Management
Basic configuration/maintenance tasks for ONVIF devices such as remote reboot, factory reset and changing network settings can all be done remotely from the VigorSwitch G2282x web UI.
ONVIF Snapshot Alert
Locating Non-Responding IP Cameras Made Easy
Managing a network of IP cameras across multiple locations can be challenging, especially when cameras stop functioning without an easy way to detect or restore them. The VigorSwitch G2282x solves this by regularly pinging ONVIF IP cameras and capturing periodic snapshots. If a camera becomes unresponsive, the switch automatically sends an email alert with the latest snapshot, allowing for quick diagnosis and resolution.
With PoE VigorSwitch models, the switch can also provide first aid by automatically power cycling the particular port to reboot the camera.
IP Conflict Detection & Prevention
Conflict Detection
The VigorSwitch continuously monitors the network environment and alerts the administrator of any IP address conflicts
Conflict Prevention
To enhance network stability, the VigorSwitch identifies misconfigured or malicious IP hosts and blocks them before any damage occurs.
LAN Management
An all-in-one management platform for Vigor devices on the LAN side.
Automatic Device Discovery
Connect a Vigor Switch or AP to the LAN side of the Vigor Router, and the router will auto-discover the device to allow it to be managed.
Provisioning
Basic settings may be done on the Vigor Router, and then provisioned to the managed Vigor Switches or APs.
Monitoring
The Vigor Router provides a centralized view of managed devices, so you can monitor and check the status of Vigor Switches or APs connected.
System Maintenance
Perform factory resets, save/restore configuration backups, or trigger reboots remotely from the Vigor Router’s interface. There is no need to log in to each device’s management page.
Management Solution
All-in-One Management |
|---|
Vigor Router SWM
- Auto-Discovery
- Provisioning
- Monitoring
- Centralized Hierarchy View
- Reboot PoE Devices Remotely
- Quick VLAN Configuration
[DISPLAY OFF] —– MOBILE VIEW
Vigor Router SWM
- Auto-Discovery
- Provisioning
- Monitoring
- Centralized Hierarchy View
- Reboot PoE Devices Remotely
- Quick VLAN Configuration
Software Management |
|---|
VigorACS 3
- Zero Touch Deployment & Provisioning
- Auto VPN
- Interface Quality & SLA
- VoIP Optimization & Monitoring
- Application Visibility
- Application Based SD-WAN Policy
- Customized Hotspot Page with Multilingual
- Hotspot Clients Analytics
- ACS Server Load Balancing / Failover
VigorConnect (FREE)
- Auto-Discovery
- Auto-Provisioning
- Monitoring
- Centralised Hierarchy View
- Alarm
- Reboot VigorAP Remotely
- Scheduled Maintenance
[DISPLAY OFF] —– MOBILE VIEW
VigorACS 3
- Zero Touch Deployment & Provisioning
- Auto VPN
- Interface Quality & SLA
- VoIP Optimization & Monitoring
- Application Visibility
- Application Based SD-WAN Policy
- Customized Hotspot Page with Multilingual
- Hotspot Clients Analytics
- ACS Server Load Balancing / Failover
VigorConnect (FREE)
- Auto-Discovery
- Auto-Provisioning
- Monitoring
- Centralised Hierarchy View
- Alarm
- Reboot VigorAP Remotely
- Scheduled Maintenance
In-the-Box
VigorSwitch G2282x
Rack Mount Kit
Console Cord
Power Cord
Quick Start Guide
Specifications
Interface [Display None]
| Interface | |
|---|---|
| LAN Port | 24 x 10/100/1000Mbps Ethernet, RJ-45 4 x 1000Mbps/10Gbps SFP+ slot |
| Console Port | 1 x RJ-45 |
| Factory Reset Button | 1 |
[DISPLAY OFF] —– MOBILE VIEW
| Interface |
|---|
| LAN Port: 24 x 10/100/1000Mbps Ethernet, RJ-45 4 x 1000Mbps/10Gbps SFP+ slot |
| Console Port: 1 x RJ-45 |
| Factory Reset Button: 1 |
Capacity [Display None]
| Capacity | |
|---|---|
| Buffer Size | 12 Mbit |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps (64 bytes) |
| MAC Address Table | 16k |
| Jumbo Frame | Up to 12KB |
| L3 Routing Table | |
[DISPLAY OFF] —– MOBILE VIEW
| Capacity | |
|---|---|
| Buffer Size: 12 Mbit | |
| Switching Capacity: 128 Gbps | |
| Forwarding Rate: 95.2 Mpps (64 bytes) | |
| MAC Address Table: 16k | |
| Jumbo Frame: Up to 12KB | |
| L3 Routing Table: | |
Networking Standards [Display None]
| Networking Standards | |
|---|---|
| Ethernet Standards | 802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T 802.3ae 10GBase-X 802.3x Flow Control 802.3 Auto-Negotiation 802.1q Tag-based VLAN 802.1p Class of Service 802.1d STP 802.1w RSTP 802.1s MSTP 802.3ad LACP 802.1ad QinQ 802.1x Port Access Control 802.1AB LLDP 802.3az EEE |
[DISPLAY OFF] —– MOBILE VIEW
| Networking Standards |
|---|
| Ethernet Standards: 802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T 802.3ae 10GBase-X 802.3x Flow Control 802.3 Auto-Negotiation 802.1q Tag-based VLAN 802.1p Class of Service 802.1d STP 802.1w RSTP 802.1s MSTP 802.3ad LACP 802.1ad QinQ 802.1x Port Access Control 802.1AB LLDP 802.3az EEE |
VLAN [Display None]
| VLAN | |
|---|---|
| Max.Number of VLAN | 512 |
| VLAN Type | 802.1q Tag-based MAC-based Protocol-Based Management VLAN Voice VLAN Surveillance VLAN |
| GVRP | |
| Q-in-Q | Basic |
[DISPLAY OFF] —– MOBILE VIEW
| VLAN | |
|---|---|
| Max.Number of VLAN: 512 | |
| VLAN Type: 802.1q Tag-based MAC-based Protocol-Based Management VLAN Voice VLAN Surveillance VLAN | |
| GVRP: | |
| Q-in-Q: Basic | |
ONVIF Surveillance [Display None]
| ONVIF Surveillance | |
|---|---|
| Discovery | |
| Surveillance Topology | |
| Real-Time Video Streaming | |
| ONVIF Device Maintenance | Device Info, Network Settings, Reset Factory Default, Time Settings, Reboot |
[DISPLAY OFF] —– MOBILE VIEW
| ONVIF Surveillance | |
|---|---|
| Discovery: | |
| Surveillance Topology: | |
| Real-Time Video Streaming: | |
| ONVIF Device Maintenance: Device Info, Network Settings, Reset Factory Default, Time Settings, Reboot | |
QoS [Display None]
| QoS | |
|---|---|
| Number of QoS Queues | 8 |
| Queue Scheduling | SPQ, WRR |
| CoS (Class of Service) | CoS, DSCP, CoS-DSCP, IP Precedence |
| Rate Limit | |
[DISPLAY OFF] —– MOBILE VIEW
| QoS | |
|---|---|
| Number of QoS Queues: | 8 |
| CoS (Class of Service): CoS, DSCP, CoS-DSCP, IP Precedence | |
| Queue Scheduling: SPQ, WRR | |
| Rate Limit: | |
Spanning Tree [Display None]
| Spanning Tree | |
|---|---|
| STP | |
| RSTP | |
| MSTP | |
[DISPLAY OFF] —– MOBILE VIEW
| Spanning Tree | |
|---|---|
| STP: | |
| RSTP: | |
| MSTP: | |
Security [Display None]
| Security | |
|---|---|
| Authentication Server | RADIUS, TACACS+ |
| 802.1X/MAC Authentication | |
| IP Source Guard | |
| Traffic Control | DoS Defense, Storm Control |
| IP Conflict Prevention | |
| Loop Protection | |
| Dynamic ARP Inspection (DAI) | |
| DHCP Snooping | |
[DISPLAY OFF] —– MOBILE VIEW
| Security | |
|---|---|
| Authentication Server: RADIUS, TACACS+ | |
| 802.1X/ MAC Authentication: | |
| IP Source Guard: | |
| Traffic Control: DoS Defense, Storm Control | |
| IP Conflict Prevention: | |
| Loop Protection: | |
| Dynamic ARP Inspection (DAI): | |
| DHCP Snooping: | |
Link Aggregation [Display None]
| Link Aggregation | |
|---|---|
| Max. Number of Group | 8 |
| Max. Number of Member in Each Group | 8 |
| Type | Static, LACP |
| Traffic Load Balancing | |
[DISPLAY OFF] —– MOBILE VIEW
| Link Aggregation | |
|---|---|
| Max. Number of Group: | 8 |
| Max. Number of Member in Each Group: | 8 |
| Type: Static, LACP | |
| Traffic Load Balancing: | |
Multicast [Display None]
| Multicast | |
|---|---|
| IGMP Snooping | v2, v3(BISS) |
| IGMP Querier | |
| MLD Snooping | v1, v2 (Basic) |
| Max. Number of Multicast Group | 256 |
| Multicast Group Filtering / Throttling | |
| MVR (Multicast VLAN Registration) | |
[DISPLAY OFF] —– MOBILE VIEW
| Multicast | |
|---|---|
| IGMP Snooping: v2, v3(BISS) | |
| IGMP Querier: | |
| MLD Snooping: v1, v2(Basic) | |
| Max. Number of Multicast Group: 256 | |
| Multicast Group Filtering / Throttling: | |
| MVR (Multicast VLAN Registration): | |
Layer 3 Features [Display None]
| Layer 3 Features | |
|---|---|
| Static Route | |
| VLAN Route | |
| DHCP Server | |
[DISPLAY OFF] —– MOBILE VIEW
| Layer 3 Features | |
|---|---|
| Static Route: | |
| VLAN Route: | |
| DHCP Server: | |
Management [Display None]
| Management | |
|---|---|
| Local Service | HTTP, HTTPS, Telnet, SSH v2 |
| Config Backup/Restore | |
| Dual Image | |
| 2-Level Admin Privilege | |
| Access Control | Access List |
| OpenVPN Client | |
| sFlow | |
| SNMP | v1, v2c, v3 |
| RMON Group | 1, 2, 3, 9 |
| Private MIB | |
| SNTP (Simple Network Time Protocol) | |
| LLDP | |
| LLDP-MED | |
| Mail Alert | Port Status, Port Speed, System Restart, PoE Warning, IP Conflict, Hardware Monitor, Device Check, ONVIF IP Cam Snapshot |
| VigorRouter Management (SWM) | |
| VigorConnect Management (Since f/w) | V2.9.1 |
| VigorACS Management (Since f/w) | V2.9.1 |
[DISPLAY OFF] —– MOBILE VIEW
| Management | |
|---|---|
| Local Service: HTTP, HTTPS, Telnet, SSH v2 | |
| Config Backup/ Restore: | |
| Dual Image: | |
| 2-Level Admin Privilege: | |
| Access Control: Access List | |
| OpenVPN Client: | |
| sFlow: | |
| SNMP: v1, v2c, v3 | |
| RMON Group: 1, 2, 3, 9 | |
| SNTP (Simple Network Time Protocol): | |
| LLDP: | |
| LLDP-MED: | |
| Mail Alert: Port Status, Port Speed, System Restart, PoE Warning, IP Conflict, Hardware Monitor, Device Check, ONVIF IP Cam Snapshot | |
| VigorRouter Management (SWM): | |
| VigorConnect Management (Since f/w): V2.9.1 | |
| VigorACS Management (Since f/w): V2.9.1 | |
Physical [Display None]
| Physical | |
|---|---|
| Rack Mountable | 1U |
| Power Input | AC 100-240V @ 0.7A |
| Backup Power Input | DC 12V @ 3A |
| Max. Power Consumption | 36 watts |
| Dimension (mm) | 440(W) x 205(D) x 44(H) |
| Weight | 2.69 kg |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 70°C |
| Operating Humidity | 10 to 90% non-condensing |
| Storage Humidity | 5 to 90% non-condensing |
[DISPLAY OFF] —– MOBILE VIEW
| Physical | |
|---|---|
| Rack Mountable: | 1U |
| Power Input: AC 100-240V @ 0.7A | |
| Backup Power Input: DC 12V @ 3A | |
| Max. Power Consumption: 36 watts | |
| Dimension (mm): 440(W) x 205(D) x 44(H) | |
| Weight: 2.69 kg | |
| Operating Temperature: 0 to 50°C | |
| Storage Temperature: -20 to 70°C | |
| Operating Humidity: 10 to 90% non-condensing | |
| Storage Humidity: 5 to 90% non-condensing | |
Note :
- All specifications are subject to change without notice.
- The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.
